Regulated Power Supplies

DC Regulated Power Supplies.

DC Regulated Power Supplies.

programmer.gif (109060 bytes)

Specifications:

Input Voltage : 220V AC +/- 10%.
Line & Load Regulation : +/- 0.05%.
Ripple and Noise : Less than 5mV.
Protection : Against short Circuit and Overload.
Transient Recovery : 100 micro seconds.
Indicating Meters:

For Variable Output Power Supplies:
- 1 set of 3 ½ digits Digital Voltmeter and Ammeter to measure outputs.
For Dual Tracking Output Power Supplies:
- 1 set of 3 ½ digits Digital Voltmeter and Ammeter to measure outputs. A switch is provided to select these meters for any output.
For Dual Variable Output Power Supplies:
- 2 sets of 3 ½ digits Digital Voltmeter and Ammeter to measure both outputs.
For Multi Output Power Supplies:
- 1 set of 3 ½ digits Digital Voltmeter and Ammeter to measure outputs. A switch set is provided to select these digital meters for any output Voltage.

Special Features:

RFI Noise filter at AC Input.
AC line status Indicator.
2 Years Warranty.

Models:

Fixed Output Power Supplies:

1. A0502 : 5V +/-10%, 2A
2. A0505 : 5V +/-10%, 5A
3. A0510 : 5V +/-10%, 10A

Variable Output Power Supplies: (Constant Voltage / Current Limit)

1. C3002 : 0 - 30V, 2A
2. C3005 : 0 - 30V, 5A
3. C3010 : 0 - 30V, 10A
4. C6001 : 0 - 60V, 1A
5. C6002 : 0 - 60V, 2A

Dual Tracking Output Power Supplies:

Without Panel Meters:
1. B1201 : +/-3V to +/-18V, 1A
2. B1202 : +/-3V to +/- 18V, 2A

With Panel Meters:
1. B1201M : +/-3V to +/-18V, 1A
2. B1202M : +/-3V to +/- 18V, 2A

Dual Variable Output Power Supplies: (Constant Voltage / Current Limit)
(Output Voltage : 2 x ( 0 - 30V )

1. D3001 : 2 X (0-30 V, 1A)
2. D3002 : 2 X (0-30 V, 2A)

Multi Output Power Supply:

1. M1004 : 0-30V/2A, 5V/2A, +/- 3V to +/- 18V/ 1A.
2. M0403 : 5V/2A, +/-3V to +/- 18V/1A.