|    In-Circuit Emulators for 8051 Devices.   |   TMS320VC5416 Products.   |  Gang Programmers.   |   
 |    Device Programmers.   |    ARM Products.   |   DSP Products. |    World’s Advanced Trainers for Microcontroller / Microprocessors.   | 
|   Embedded Control Solutions - 8031 Microcontrollers.    |  Embedded Control Solutions - Renesas Microcontrollers.   |
|   DC Regulated Power Supplies.  |  Downloads.  |  Mailing List.  |  Contact.  |  Home.  |

R8C/Tiny Resources

Recently, FE has developed an extensive knowledge base and few development tools to enable the system designer get a quick start using Renesas R8C/tiny Microcontrollers.

Knowledge base contains the following documents:

1. Smart Book on R8C/Tiny micons.
2. Quick start Guides to use various Renesas software tools.
3. R8C/Tiny based Application notes.

SmartBook on R8C/Tiny micons.

FE has published a simple and easy to understand document on R8C/tiny to enable the designers acquire a working knowledge on these micons without much efforts.

Quick start Guides.

Study Flow  for Microcontroller R8C/25. Gives you an overall picture of R8C/25 architecture and reference to the supporting documents. 

SANGO - Start up File Quick Start Guide for using SANGO ( Sample Application Program Generator and Organizer ).

SANGO to HEW Application note to make the codes generated by SANGO compatible  to HEW (High performance Embedded Workshop) for compilation. 

Quick Start Guide for HEW. - Gives you a quick start  to use the  HEW (High performance Embedded workshop)

Quick Start Guide for Flash Starter software. Gives you a quick start  to the Flash Starter Software (Flash Programming Software for R8C/ Tiny))

Step By Step Procedure to Start a  Project - A sample project - How to start and finish using the relevant softwares like SANGO, HEW.

R8C/Tiny System Simulator  Features of  R8C/Tiny System Simulator .

Development Tools.

FE has introduces many modules to the Renesas’s Code Generating tool, “Sample Application Program Generator & Organizer (SANGO)”.

Topview Simulator  for the R8C/Tiny Microcontrollers.

These software tools can be downloaded from here free of cost.

Example Projects for R8C/Tiny System Simulator.

More then 20 Example projects are available for  R8C/Tiny System Simulator.  These example projects can be downloaded from here. Install the Example projects by clicking the above link. The installation process will prompt you to select the directory for installation. The projects will be installed in the selected directory.  These projects can be opened only in the R8C/Tiny System Simulator.

Example projects are organized in separate directories. Each project directory has a PDF file which gives you a detailed description of the project and how to use  it in the R8C/Tiny System Simulator. 

Open the R8C/Tiny System Simulator and use the Open Project  command to open the project. You can compile the project  and simulate it using the R8C/Tiny System Simulator.

List of Example Projects:

• Demo 1 -  Study of Special Features of R8C/Tiny Micon - External Crystal Oscillator.
• Demo 2 -  Seven Segment Display Interface - Multiplexed With 7 Segment I/P.
• Demo 3 -  LCD Interface - 8 bit mode.
• Demo 4 -  Scan a 4 X 4 Matrix Keyboard using Timer X Interrupts.
• Demo 5 -  IIC RTC Interface with R8C/Tiny Micon. (Simulated IIC Bus).
• Demo 6 -  4 Digit Stop Clock with Start, Stop and Clear Controls.
• Demo 7 -  8 Channel Sequential Controller with individual on-time setting.
• Demo 8 -  One Channel Programmable Timer with 8 different time setting.
• Demo 9 -  Study of Toggle Switches and Push Button Switches.
• Demo 10 -  Study the Interrupt facility - INT0 and INT3 interrupts.
• Demo 11 -  Study of Multilevel Interrupts using INT0, INT1 and INT3.
• Demo 12 -  Study of ADC with variable external Reference.
• Demo 13 -  Study of Special Features of R8C/Tiny Micon - Watch Dog Timer.
• Demo 14 -  One Shot Generation using Timer RB.
• Demo 15 -  Serial Port Study of R8C/Tiny Micon - Multi Processor Communication Mode (Master).
• Demo 16 -  Serial port study - Serial port 0 is used to send a message to host at 9600 baud rate.
• Demo 17 -  Serial Port study - This program will read number of bytes from host and store it in the RAM area of micon.
• Demo 18 -  Square Waveform Generation using Timer RB.
• Demo 19 -  Study of Special Features of R8C/Tiny Micon - Oscillation Stop Detector.
• Demo 20 -  Reads all 12 channels of ADC and send the data through serial port.
• Demo 21 -  Seven Segment Display Interface - Multiplexed With 7 Segment I/P.
• Demo 22 -  Hardware LIN Study of R8C/Tiny Micon - Master.